Gypsum-Based Indoor Non-Intumescent Fire-Resistant Coating for Steel Structures: Physical Insulation, Eco-Friendly, Low-Smoke, Strong Adhesion for Indoor Steel.

Product Description

Gypsum-based indoor non-intumescent fire-resistant coating for steel structures: physical insulation, eco-friendly, low-smoke, strong adhesion for indoor steel.

This product is composed of gypsum and lightweight thermal insulation materials, and is applied to the surface of indoor steel structures to form a fire-resistant and thermal-insulating protective layer, preventing damage to load-bearing steel structures caused by fires. The product exhibits excellent adhesion and flexibility, along with outstanding crack resistance. It has undergone type testing by the National Fire Protection and Flame-Retardant Product Quality Supervision and Inspection Center, and all its performance indicators fully meet or exceed the requirements stipulated in the GB 14907-2018 "Fire-Resistive Coating for Steel Structure" standard.

Product  Features

Application Area

It is suitable for fire protection of large indoor steel structures in warehouses, stadiums, convention and exhibition centers, office buildings, train stations, and other similar venues.

Featured projects

Construction Technology
1. Before application, the surface of the steel structure should be thoroughly derusted, clean, and free from oil stains and dust, and an anti-rust paint should be applied.
2. To enhance the adhesion between the fire-resistant coating and the anti-corrosion primer on the steel structure, it is recommended to spray an interfacial layer. The mixing ratio for the interfacial layer coating is (powder: water: binder = 100:120:40). Stir well before application and prepare as needed.
3. Before construction, evenly mix the accelerator with water and set it aside in a container for later use. Mixing ratio: (accelerator/water = 25Kg/40 Kg).
4. Evenly mix the powder with water, open or close the air supply valve of the spray gun, move the spray gun, start the accelerator pump, and prepare for spraying.
5. Mixing ratios: Fire-resistant coating/water = 20kg/24-30kg. Fire-resistant coating/accelerator solution = 20Kg/3.3-3.7Kg. The amount of accelerator should be adjusted according to the on-site construction environment temperature and requirements by regulating the flow rate of the accelerator pump to meet the needs.
6. The spraying process should not be interrupted. If interruption occurs, the spraying machine must be cleaned immediately to prevent the material from solidifying in the barrel.
7. The product can be continuously sprayed to the designed coating thickness. Markings for product thickness can be made in advance to improve spraying efficiency.
8. After spraying is completed, thoroughly clean the spraying machine to prevent the coating from clogging the gun due to agglomeration.
9. Refer to the latest product test report for specific construction quantities and coating thicknesses at different times.

Notes
1. When using the powder material, it should be mixed in its entirety at one time to avoid uneven mixing.
Excessive use of accelerator will affect the strength of the fire-resistant coating.
2. Construction should not be carried out when the temperature is below 5ºC or above 35ºC, or when the wind speed exceeds 5m/s.
3. During storage, the material should be kept off the ground and placed in a dry, ventilated area to prevent moisture absorption and caking. Ensure proper sealing during storage and transportation to prevent moisture and rainwater infiltration, as the material will become ineffective if it gets damp.
4. The product has a shelf life of 6 months.

Comapany

Shandong Judong New Material Co.,Ltd.

Shandong Judong New Material Co., Ltd. was established in 2018 with a registered capital of 30 million yuan, mainly engaged in the R&D, sales, technical services and international trade of architectural coatings, fireproof coatings, anti-corrosion coatings and industrial coatings. As a strategic partner of Shandong Shengguang Chemical Group Co., Ltd., it is the only authorized sales and service provider for products related to the "Singal" paint brand.

The "Singal" paint brand was registered in 2001 and has a history of 20 years. Since its establishment, it has been committed to the production and R&D of water-based coatings and special coatings, and has successively won many honorary titles such as "China Well-known Trademark", "Quality Inspection-free Product", "China's Top Ten Ecological Coatings Brands", "Shandong Famous Brand Product", "Shandong Famous Trademark", "China's Top Ten Industrial Coatings Brands", etc., enjoying a high reputation in the industry.

 

The company has a professional operation team. As a material supplier for many well-known engineering projects such as the Hong Kong-Zhuhai-Macao Bridge, Hengli Petrochemical, Shanghai Metro, and Liuting Airport, it has won unanimous praise in the industry for its excellent quality and good service. "Singal" paint is the preferred fireproof coating brand for well-known enterprises such as CNPC, CNOOC, Sinochem, China Railway, China State Construction, Sinochem Construction, Wanda, Shenhua, Haier, Yuanda, Wanhua,  and Vipshop, and is exported to more than ten countries in Asia, Africa, and the Americas.

Adhering to the business philosophy of "integrity-based, service-oriented", the company takes customer satisfaction before, during and after sales as its first pursuit, providing customers with one-stop solutions of "products + coating solutions + construction guidance + after-sales maintenance". With a professional technical team and after-sales service team, it promises to arrive at the customer's site within 48 hours of receiving the customer's demand, providing you with professional after-sales service and technical support.

We are willing to look forward to cooperating with you with an open mind and creating a better future together.

Certifications

Real view of the factory

Packing & Shipping

Exhibition

Certificate of Honor

Partners

FAQ

Q:Why Choose Shandong Judong New Materials?
A:We leverage our full industrial chain integration, rich overseas project experience, superior product stability, and competitive pricing to offer one-stop solutions covering R&D, production, and construction. Whether for large-scale long-term cooperation or urgent small-batch orders, we meet your needs to help you stand out in market competition.

Q:Do You Have Your Own Production Facilities?
A:Absolutely! We operate modern, large-scale production plants equipped with advanced equipment and a professional technical team. From raw material procurement to finished product delivery, we independently control the entire process, strictly adhering to quality management systems to ensure every product meets high standards.

Q:What Product Categories Do You Offer?
A:Our product line is diverse, covering mainstream categories such as fireproof coatings, anti-corrosion coatings, and architectural coatings. These are widely applicable to construction projects, industrial facilities, municipal projects, etc. We also support personalized product customization based on customer needs to meet your diverse requirements.

Q: What Is the Production Cycle for Products?
A:Under normal circumstances, our efficient production system ensures product manufacturing is completed within 7 working days. Upon production completion, we immediately initiate the shipping process to quickly respond to your needs.

Q:When Will My Order Be Shipped After Placing an Order?
A:We always prioritize fast delivery as a service principle. After the order is produced, we will arrange shipment at the earliest opportunity to deliver products to you in the shortest possible time.

Q:How Are Products Packaged?
A:We adopt professional packaging solutions to ensure products remain safe during transportation. For different types of coating products, we use packaging forms such as sealed barrels and moisture-proof bags, with clear product information and usage instructions marked on the outer packaging. If you have special packaging requirements, feel free to communicate with us for customized packaging services.