Non-Toxic Eco-Friendly Outdoor Non-Intumescent Fire-Resistive Thick Fireproof Coating for Steel Structures

Product Description

Non-toxic Eco-friendly Outdoor Non-intumescent Fire-resistive Thick Fireproof Coating for Steel Structures

This product is a composite material formulated from lightweight thermal insulation material and inorganic hydraulic setting material. When applied to the surface of outdoor steel structures, it forms a fire-resistant and thermal-insulating protective layer, effectively preventing fire-induced damage to load-bearing steel components. The product demonstrates excellent adhesion, flexibility, weather resistance, and decorative performance, along with superior crack resistance. It meets the fire endurance requirements for steel structures exposed to cellulose fires and hydrocarbon fires. Type-tested by the National Fire Protection and Flame-Retardant Product Quality Supervision and Inspection Center, all performance indicators of the product fully meet or exceed the requirements specified in the GB 14907-2018 standard, "Fire-Resistive Coating for Steel Structures."

Product  Features

Application Area

It is applicable for fire protection of large-scale indoor and outdoor steel structures in industries and facilities such as petrochemical plants, drilling platforms, power equipment installations, warehouses, stadiums, convention and exhibition centers, and office buildings.

Featured projects

Construction Technology
 1. Prior to application, the steel structure surface must be thoroughly derusted, cleaned, and free of oil, dust, and other contaminants. Apply two coats of anti-corrosion primer.
 2. The product shall be applied using spraying or troweling techniques. To ensure optimal adhesion between the fire-resistive coating and the anti-corrosion primer on the steel structure, a single coat of interfacial layer must be applied.
 3. Mixing ratio for the interfacial layer coating (powder material : water : binder = 100:120:40). Stir thoroughly before application. The wet mixture must be used within 2 hours and prepared as needed.
 4. Refer to the table below for the mixing ratios of the intermediate and topcoat layers. Stir thoroughly before application. The wet mixture must be used within 2 hours and prepared as needed.

NO.	Coating application method	Coating : Water : Binder (by weight ratio)
1	Spraying	100:120:5
2	Troweling	100:100:5

 5. Application shall be carried out in multiple layers, with each layer's thickness controlled between 7-10 mm until the specified thickness is achieved. Each subsequent layer should be applied only after the previous layer has dried sufficiently (approximately 24-hour intervals between applications). During interlayer construction, the surface of the fire-resistive coating should not be smoothed but left rough to enhance adhesion between layers.
 6. During and within 24 hours after coating application, the coating must be protected from rain. The ambient temperature shall be maintained between 5°C and 35°C.
 7. After the non-intumescent fire-resistive coating for steel structures reaches the design thickness and final setting, it shall undergo 7 days of moist curing, preferably via spray misting, followed by 21 days of natural curing. During curing, the coating must be protected from freezing, impact, and water washing.
 8. Once the fire-resistive coating reaches the required thickness and dries completely, apply two coats of decorative topcoat to effectively extend the service life of the entire coating system.
 9. Refer to the product's latest test report for specific application rates and layer thicknesses at each construction stage.

Notes
  1. The entire package must be mixed at once and used immediately upon preparation.
  2. Construction should not proceed under the following conditions: temperatures below 5°C or above 35°C, or wind speeds exceeding 5 m/s.
  3. Store the material off the ground in a dry, ventilated area to prevent moisture absorption and caking. Ensure proper sealing during storage and transportation to avoid exposure to moisture or rain, as material degradation will occur if dampened.
 4. The dedicated binder provided with this coating must be stored at temperatures ≥5°C.
 5. Shelf life: 9 months.

Comapany

Shandong Judong New Material Co.,Ltd.

Shandong Judong New Material Co., Ltd. was established in 2018 with a registered capital of 30 million yuan, mainly engaged in the R&D, sales, technical services and international trade of architectural coatings, fireproof coatings, anti-corrosion coatings and industrial coatings. As a strategic partner of Shandong Shengguang Chemical Group Co., Ltd., it is the only authorized sales and service provider for products related to the "Singal" paint brand.

The "Singal" paint brand was registered in 2001 and has a history of 20 years. Since its establishment, it has been committed to the production and R&D of water-based coatings and special coatings, and has successively won many honorary titles such as "China Well-known Trademark", "Quality Inspection-free Product", "China's Top Ten Ecological Coatings Brands", "Shandong Famous Brand Product", "Shandong Famous Trademark", "China's Top Ten Industrial Coatings Brands", etc., enjoying a high reputation in the industry.

 

The company has a professional operation team. As a material supplier for many well-known engineering projects such as the Hong Kong-Zhuhai-Macao Bridge, Hengli Petrochemical, Shanghai Metro, and Liuting Airport, it has won unanimous praise in the industry for its excellent quality and good service. "Singal" paint is the preferred fireproof coating brand for well-known enterprises such as CNPC, CNOOC, Sinochem, China Railway, China State Construction, Sinochem Construction, Wanda, Shenhua, Haier, Yuanda, Wanhua,  and Vipshop, and is exported to more than ten countries in Asia, Africa, and the Americas.

Adhering to the business philosophy of "integrity-based, service-oriented", the company takes customer satisfaction before, during and after sales as its first pursuit, providing customers with one-stop solutions of "products + coating solutions + construction guidance + after-sales maintenance". With a professional technical team and after-sales service team, it promises to arrive at the customer's site within 48 hours of receiving the customer's demand, providing you with professional after-sales service and technical support.

We are willing to look forward to cooperating with you with an open mind and creating a better future together.

Certifications

Real view of the factory

Packing & Shipping

Exhibition

Certificate of Honor

Partners

FAQ

Q:Why Choose Shandong Judong New Materials?
A:We leverage our full industrial chain integration, rich overseas project experience, superior product stability, and competitive pricing to offer one-stop solutions covering R&D, production, and construction. Whether for large-scale long-term cooperation or urgent small-batch orders, we meet your needs to help you stand out in market competition.

Q:Do You Have Your Own Production Facilities?
A:Absolutely! We operate modern, large-scale production plants equipped with advanced equipment and a professional technical team. From raw material procurement to finished product delivery, we independently control the entire process, strictly adhering to quality management systems to ensure every product meets high standards.

Q:What Product Categories Do You Offer?
A:Our product line is diverse, covering mainstream categories such as fireproof coatings, anti-corrosion coatings, and architectural coatings. These are widely applicable to construction projects, industrial facilities, municipal projects, etc. We also support personalized product customization based on customer needs to meet your diverse requirements.

Q: What Is the Production Cycle for Products?
A:Under normal circumstances, our efficient production system ensures product manufacturing is completed within 7 working days. Upon production completion, we immediately initiate the shipping process to quickly respond to your needs.

Q:When Will My Order Be Shipped After Placing an Order?
A:We always prioritize fast delivery as a service principle. After the order is produced, we will arrange shipment at the earliest opportunity to deliver products to you in the shortest possible time.

Q:How Are Products Packaged?
A:We adopt professional packaging solutions to ensure products remain safe during transportation. For different types of coating products, we use packaging forms such as sealed barrels and moisture-proof bags, with clear product information and usage instructions marked on the outer packaging. If you have special packaging requirements, feel free to communicate with us for customized packaging services.